Introduction
In order to make use of the expanded features, Wireless Bridge acts as a connection between two LAN networks, or you might say it is wireless communication among the wired networks using WiFi. It’s also referred to as a WiFi bridge. It offers you functionalities similar to those of a router, range extender, or access point in addition to just network connectivity.
As implied by the name, a wireless bridge enables you to connect or bridge between two distinct networks. This is also possible with wired networks because of the versatility of these wireless bridges. Since you can provide connectivity between two wired networks without the use of cables, we’ve included their top wireless bridges below, which were selected based on the following criteria:
Speed:
It is crucial to check a networking device’s speed rating whenever you are discussing it in order to guarantee fast network access rates. Thank goodness, every wireless bridge has a speed rating that ranges from 300 Mbps to 900 Mbps, with the greater number obviously being preferable.
Range:
Checking the range of wireless bridges is crucial because they depend on wireless signals. Thankfully, the majority of wireless bridges provide a range rating of 2 miles, 3 miles, and occasionally even 5 miles for maximum adaptability.
Antenna Strength:
To get a sense of both the range and the strength, you can also look at the antenna strength rating. The performance is better with a greater value of 14 dBi or something comparable, however, the signals are more directed. Going with a lower gain of about 9 dBi can offer a wonderful balance between range and directionality if you want something more adaptable.
These elements undoubtedly come in useful when choosing the best wireless bridge. But to make sure you do, we’ve included a thorough “Buying Guide” along with explanations of all the various wireless bridges’ key features and specs. In other words, by the time you get to the conclusion of this listicle, you can select the greatest wireless bridge for your requirements.
Best Wireless Bridges of 2023
TP-Link N300 Wireless Bridge
EnGenius ENH500v3 Wireless Bridge
TP-Link Deco Whole Home Mesh WiFi System
Tycon EZ-Bridge-Lite Wireless Bridge
NETGEAR Wi-Fi Range Extender EX3700
KuWFi 5.8G Wireless Bridge
TP-Link N300 2T2R Wireless Bridge
One of the most well-known names in networking equipment, including the reasonably priced wireless bridge unit mentioned here, is TP-Link.
Our TP-Link CPE210 wireless bridge is ranked first in this article because it is among the least expensive solutions available, making it the ideal choice for those on a tight budget. Despite being a very cheap wireless bridge, it has a respectable 300 Mbps speed rating. The finest feature of this wireless bridge is its high degree of adaptability and ability to operate across a range of up to 5 KM.
Its MIMO antennas, which operate on the 2.4 GHz band, have a 9 dBi signal strength for excellent directionality. This device has AP, client, and AP router modes in addition to a wireless bridge. However, the fact that there is just one wireless bridge provided in the box may disappoint some network admins. TP-Link is a well-known company, therefore you also receive a 2-year warranty with it.
In addition to these, it contains a passive PoE adapter, which makes it ideal for use in remote locations and allows remote connections up to 200 feet. Since it functions outdoors as well, it has features like water resistance and other attributes that enable it to function in any weather.
With its centralized management control application, this product from TP-LINK is specifically made for wireless communication outside. It can handle point-to-point, point-to-multipoint, and outdoor WiFi coverage.
| Specifications | |
|---|---|
| SPEED | 300 Mbps |
| RANGE | Up to 5 KM |
When it comes to networking and wireless devices, EnGenius Technologies is one of the most prestigious brands available. They also provide high-performance solutions like this one.
As one of the highest-performing wireless bridges on this list, the EnGenius Technologies ENH500v3 wireless bridge is listed in second place. This wireless bridge has an 867 Mbps speed rating, which is substantially faster than most people will require. Despite being rated at such a high speed, it still has a great range of up to 5 miles.
The greatest network speed you may get from this wireless bridge is three times quicker than the standard 802.11n speed, thanks to cutting-edge technology. The biggest coverage area and longest network range are sent by its built-in antennae.
It has PoE enabled, enabling hassle-free and simple implementation. It has 10/100/1000 ethernet connections, which provides the fastest data transfer possible. This product is one of the greatest wireless bridges since it enables super 4K camera streaming.
EnGenius’ strong 16 dBi antennae are what allow it to deliver such a long range. You will be happy to learn that both of the supplied devices are IP55 water-resistant rated if you want to use this wireless bridge outdoors. Additionally, it comes with a number of modes, including CPE, client bridge, PTP, PTMP, and more. It should be expected that a premium wireless bridge will have a one-year warranty.
| Specifications | |
|---|---|
| SPEED | 867 Mbps |
| RANGE | Up to 5 miles |
You can select from a variety of units in this Deci system based on your needs. Here, we’re referring to a system with three units that offers the fastest data transfer rates possible over a wide coverage area.
Because it works with Alexa, voice commands can be used to operate it. You can control it without using Alexa by using its app, which also lets you create a secure guest network and manage all of your connected devices.
This gives you decent data speed for a big coverage area which enables you to walk freely throughout your apartment as the units work together to build a unified network and your device automatically gets connected to the fastest network with the assistance of the Deco system.
| Specifications | |
|---|---|
| SPEED | 1267 Megabits per Second |
| RANGE | 5,500 sq. ft. |
If you’re searching for something high-end and made for industrial use, you might also take into account Tycon Power Systems and the wireless bridge unit it mentions here.
The EZ Bridge Lite EZBR-0214+ wireless bridge from Tycon Power System is ranked second on this list because it is yet another suitable wireless bridge for outdoor deployment. The fact that this wireless bridge device has a fantastic range of up to 3 miles is one of its best features. Its speed rating of just 100 Mbps is regrettably pretty subpar.
This is a result of Tycon Power choosing dependability over high speeds. With this wireless bridge, you get features including a 2.4 GHz band and strong 14 dBi signal strength. Additionally, mesh configuration for a sizable wireless bridge network is supported. The entire item is weather sealed because it is designed for outdoor installation. For your peace of mind, this wireless bridge comes with a 1-year warranty.
| Specifications | |
|---|---|
SPEED | 100 Mbps |
| RANGE | Up to 3 miles |
It is one of the greatest wireless connectivity services for protecting you from network dead zones because it can function as a network extender, which makes it simple to expand your data coverage region.
Another positive aspect of this product is its discrete design, which allows you to plug it in straight, turn it on, connect it to your devices, and then use it right away without any more setup steps.
You can also create a connected Ethernet connection if you need a better network to work with certain large files. Additionally, its increased range gives you the option to connect up to 20 devices rather than 15 while still covering a sizable extended region.
That indicates that it is compatible with practically all of your gadgets, including speakers, laptops, desktop computers, cellphones, and many more. It uses unique technologies to give you a dual bandwidth experience. In addition to being easy to set up, it gives your system superior security mechanisms that aid in data security.
| Specifications | |
|---|---|
| Bandwidth | Dual Band up to 750 Mbps |
| WiFi Coverage | Up to 1200 sq. ft. |
If you’re seeking a high-performance solution from a small brand, you can also take into account KuWFi and its networking products, such as the wireless bridge mentioned here.
One of the top solutions out there, as well as the one described here, is KuWFi’s wireless bridge. This is mainly because it has a considerably better speed rating than others, at 900 Mbps. Although its range rating of up to 3 KM is not the highest, it is unquestionably sufficient in the majority of applications where a wireless bridge may be required.
KuWFi uses the 5 GHz spectrum and a variety of function modes, including AP, repeater, and others, to provide such fast speeds. The antenna’s rating for signal strength is a respectable 12 dBi. This UeeVii wireless bridge has a display on the front, just like the previous one did. Furthermore, although all of the provided wireless bridge units come with a 1-year warranty, their construction quality is on the mediocre side.
| Specifications | |
|---|---|
| SPEED | 900 Mbps |
| RANGE | Up to 3 KM |
TP-Link mainly manufactures WiFi routers that are great for use in your home, some of which can even perform wireless bridge capabilities, making them incredibly versatile.
The most adaptable option here is the TP-Link TL-WA801ND wireless bridge, which is also the least expensive. The reported speed rating of 300 Mbps is expected considering that it is basically a WiFi router, which is good for a wireless bridge at its pricing point. However, due to its extremely constrained range of approximately 30 meters, this WiFi router or wireless bridge is only suitable for indoor use.
In terms of this 2.4 GHz WiFi router’s adaptability, it supports AP, client, repeater, and wireless bridge modes. You receive a 12 dBi antenna strength while using it in wireless bridge mode, which is respectable. This TP-Link wireless bridge has a 2-year warranty, much like the one mentioned above and earlier.
| Specifications | |
|---|---|
| SPEED | 300 Mbps |
| RANGE | Up to 30 meters |
Buying Guide for the Best Wireless Bridges
You may need to join two different wired networks together in a variety of situations. But when you can create a new connected connection between the two for any type of physical restrictions, this can become quite a problem. In this situation, you might think about employing something like the top wireless bridges that are shown above.
All of the numerous models mentioned above have been described together with their specifications and features to assist you in choosing the best wireless bridge for your requirements. If you want to learn more about buying the correct wireless bridge, you can also look at this comprehensive buying guide:
Speed
It is crucial to make sure that the wireless device you purchase is a high-performance wireless router or wireless bridge. You should start by looking at your wireless bridge’s speed rating in order to ensure the same. This is specified as 300 Mbps or 900 Mbps, just like any other networking device. The 900 Mbps speed rating is significantly superior to the other two for the best networking speeds at all times.
Range
A wireless bridge will be used to wirelessly connect two networks, hence it is critical that the bridge has a respectable range. Otherwise, connecting networks that are located far away won’t be possible. Thankfully, wireless bridges frequently have range ratings of 2, 3, and 5 kilometers. Such large range numbers ought to be more than sufficient depending on your needs and application.
Antenna Strength
The range rating provides information about the maximum distance a wireless bridge can be used, but it does not provide the full picture. Even if there are wireless signals available at a particular location, the performance might not be satisfactory. As a result, you should also assess your wireless bridge’s antenna strength.
You will receive higher strength and performance if you choose a high antenna strength, such as 16 dBi. However, depending on your chosen use, the extremely directional nature of such antennas may be a problem. A 9 dBi, on the other hand, will function significantly better in various directions for high adaptability even though it may give slightly slower speeds.
Wireless Band
Wireless bridges have various bands that they could employ for connectivity, just like a Wi-Fi router. Depending on the wireless bridge you’re using, the main wireless transmission bands that fall under this are 2.4 GHz and 5.8 GHz. A 2.4 GHz wireless band often provides a longer range as compared to other wireless bands, but it also has slower speeds (about 300 Mbps), which may be too slow for some users.
The 5.8 GHz spectrum, on the other hand, provides 900 Mbps of substantially greater speeds for much better network performance. The performance of your wireless bridges might be impacted by the bands, thus many of them feature dual-band compatibility to make switching between these two bands simple.
Number of Bridges
Use two wireless bridge units, one of which serves as a transmitter and the other as a receiver, to set up a wireless bridge between two networks. Therefore, it’s crucial to verify the number of bridges that are contained in the package. While you can purchase two individual wireless bridge units to make them work, many of them come in packs of two. This not only provides a better value for the money but your wireless bridge may also be used straight away.
Warranty
All of your networking equipment should remain operational for as long as possible, whether you choose a wireless router or a wireless bridge. To put it another way, it is always a good idea to look into the warranty that your wireless bridge offers. The typical wireless bridge warranty is one or two years, which should be sufficient for the majority of users.
Frequently Asked Questions
What is a Wireless Bridge?
Let’s start by attempting to comprehend what a wireless bridge actually means. Make sure you understand what it is and whether you actually need it before making a purchase. A wireless bridge is typically referred to as a piece of hardware. This hardware component’s main use is to wirelessly link two or more LAN (Local Area Network) devices together. It accomplishes this by utilizing WiFi to connect the LAN parts.
How Does a Wireless Bridge Work?
It is actually fairly simple to set up, regardless of whether you are installing the wireless bridge in your home network or require it to connect LAN ends at a distance. The client and the access point are the two most crucial components in terms of functioning. One of the LAN points becomes the access point and the other becomes a client when the hardware device connects two or more LAN points. Devices connecting just two devices are referred to as point-to-point devices, whilst devices connecting wirelessly over WiFi to numerous devices operate on a point-to-multipoint basis.
Which is faster bridge mode or router?
When two LAN networks—or more precisely, two routers—are connected in bridge mode, the network’s coverage area is increased. You would consequently have a faster speed than with a single router.
Final Thoughts
As a result, reading this article could help you learn more about wireless bridges and their features. You can determine which wireless bridge would be the finest for you based on your demands thanks to its buying advice and explanation of the seven greatest wireless bridges. To learn more about them, you can also look at their improved version and updated history. We sincerely hope that you will find this information to be very beneficial.
